Honda High Performance Clutch Kit

Honda Racing Clutch Kit includes: Steel Clutch Plates, Friction Plates, Heavy Duty Clutch Springs

Honda Lockup Clutch Kit

High Performance Engines are hard on clutches, the lockout clutch will eliminate excessive slipping and improve your clutch life up to 5 times longer.

 

Honda Quick Change Clutch Modification

The banshee quick change modification eliminates the need to remove your complete clutch cover to access your clutch for maintenance or adjustments. The two billet rings that make up the modification have full O-ring seals, and come pre-polished, The 12 stainless steel allen button heads that bolt the modification together also come pre-polished. The modification has been redesigned to clear the stock foot pegs which eliminates the need to have any foot peg spacers

Blue-Clear-Red-Smoke-Billet

Honda 250R/500R+ Cylinder

Sabertooth Cylinder Kit

The Sabertooth Cylinder Kit is for the Honda 250R 1985-1989, this performance cylinder is Nikisil Plated and has the ultimate Intake/Transfer/Exhaust Tract. Huge Power Gains can be achieved from this cylinder kit.

Cylinder Kit Includes: TRX Sabertooth Cylinder Plated, Cylinder Head Cover, 95mm Interchangeable Head Dome, 95mm Piston Kit wit 24mm pin, 24mm Wrist Pin Bearing, Reed Valve Manifold, Reed Valve Assembly, Exhaust Valve Actuator Assembly, Exhaust Valve Gate, Water Inlet/Outlet ,Base Gasket, Exhaust Manifold, Exhaust Manifold Gasket, Inner Head Dome O-Ring, Head Insert O-Ring, Outer Head Water Jacket, O-Ring Head Studs, Cylinder Base Studs, 12 Point Cylinder Base Nuts

Sabertooth Handbuilt Pipe

$350

34-44mm Keihin Alcohol Carburetor

Looking for a good set of carbs that are easy to tune and have proven themselves on the track and hill? This alcohol carburetor conversion includes the carburetor of your choice, alcohol conversions can be done by many builders, it seems everyone uses different needles and components. We have our own way running alcohol carburetors as well, we use a custom ground needle that has taken many years to perfect, to make this conversion happen you need specific orifices to be made larger flowing more methanol, we also have a specific set of diameters to make our needle/components work properly.